Preparation of β-cyclodextrin/polysaccharide foams using saponin

• Max Petitjean and
• José Ramón Isasi

Beilstein J. Org. Chem. 2023, 19, 78–88, doi:10.3762/bjoc.19.7

• matrices. The saponin of soapbark (Quillaja saponaria) has been used to obtain foams using different procedures. The influence of the synthesis path on the porosity of the materials and their corresponding sorption capacities in the aqueous phase were evaluated. Keywords: chitosan; cyclodextrin polymers

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

• Alberto Rubin Pedrazzo,
• Fabrizio Caldera,
• Marco Zanetti,
• Silvia Lucia Appleton,
• Nilesh Kumar Dhakar and
• Francesco Trotta

Beilstein J. Org. Chem. 2020, 16, 1554–1563, doi:10.3762/bjoc.16.127

• . Polysaccharides and, among them, starch derivatives such as cyclodextrins (CD), have recently emerged as they are safe, of low cost and biodegradable. Cyclodextrin nanosponges (CD-NS) are crosslinked cyclodextrin polymers characterized by a nanosized three-dimensional network. The reactive hydroxy groups of CDs

• the samples containing rhodamine B, confirmed the presence of the organic compound within the structure (≈1 wt % N). Conclusion Crosslinked cyclodextrin polymers, also called nanosponges (NS), were prepared via a new synthetic route based on mechanochemistry. The green synthetic route proposed here

Reaction of oxiranes with cyclodextrins under high-energy ball-milling conditions

• László Jicsinszky,
• Federica Calsolaro,
• Katia Martina,
• Fabio Bucciol,
• Maela Manzoli and
• Giancarlo Cravotto

Beilstein J. Org. Chem. 2019, 15, 1448–1459, doi:10.3762/bjoc.15.145

• have different complexation properties to those of their classically prepared analogues. Keywords: crosslinked cyclodextrin polymers; (2-hydroxy)propylcyclodextrin; mechanochemistry; nucleophile reaction; planetary ball mill; solventless synthesis; Introduction The derivatisation of natural

Dynamics and interactions of ibuprofen in cyclodextrin nanosponges by solid-state NMR spectroscopy

• Monica Ferro,
• Franca Castiglione,
• Nadia Pastori,
• Carlo Punta,
• Lucio Melone,
• Walter Panzeri,
• Barbara Rossi,
• Francesco Trotta and
• Andrea Mele

Beilstein J. Org. Chem. 2017, 13, 182–194, doi:10.3762/bjoc.13.21

• demonstrated for molecular imprinted epichlorohydrin–cyclodextrin polymers [13]. In the present work, CDNS(1:4) and CDNS(1:8), along with the corresponding ibuprofen loaded systems, are used as a paradigmatic case. The CDNS do not show significant chemical shift variations on passing from the unloaded polymers

Stabilization of nanosized titanium dioxide by cyclodextrin polymers and its photocatalytic effect on the degradation of wastewater pollutants

• Tamás Zoltán Agócs,
• István Puskás,
• Erzsébet Varga,
• Mónika Molnár and
• Éva Fenyvesi

Beilstein J. Org. Chem. 2016, 12, 2873–2882, doi:10.3762/bjoc.12.286

Polydisperse methyl β-cyclodextrin–epichlorohydrin polymers: variable contact time ¹³C CP-MAS solid-state NMR characterization

• Isabelle Mallard,
• Davy Baudelet,
• Franca Castiglione,
• Monica Ferro,
• Walter Panzeri,
• Enzio Ragg and
• Andrea Mele

Beilstein J. Org. Chem. 2015, 11, 2785–2794, doi:10.3762/bjoc.11.299

• spectroscopy; Introduction Cyclodextrin polymers are a subject of great interest because of their use in pharmaceutical industry [1][2], analytical chemistry [3][4][5], wastewater treatment [6] and food industry [7][8][9]. Water-insoluble β-cyclodextrin (β-CD) polymers [10] have been widely described to

• recognition sites for the template molecule. As a matter of fact, high-resolution solid-state NMR is a powerful tool to characterize the structure of polymers [23][24] and to study their dynamics [25][26]. Crini has reported previously a solid-state NMR spectroscopy study [27][28] of β-cyclodextrin polymers

• approximated by a Gaussian function curve fitting analysis. General procedure for the preparation of the cyclodextrin polymers Imprinted polymers were synthesized by a one-step condensation polymerization analogous to that described in [22]. Sodium hydroxide (5 g) was dissolved in water (15 g) and heated under

Formation of nanoparticles by cooperative inclusion between (S)-camptothecin-modified dextrans and β-cyclodextrin polymers

• Thorbjørn Terndrup Nielsen,
• Catherine Amiel,
• Laurent Duroux,
• Kim Lambertsen Larsen,
• Lars Wagner Städe,
• Reinhard Wimmer and
• Véronique Wintgens

Beilstein J. Org. Chem. 2015, 11, 147–154, doi:10.3762/bjoc.11.14

• prepared with a degree of substitution of (S)-camptothecin between 3.1 and 10.2%. The binding properties with β-cyclodextrin and β-cyclodextrin polymers were measured by isothermal titration calorimetry and fluorescence spectroscopy, showing no binding with β-cyclodextrin but high binding with β

• -cyclodextrin polymers. In aqueous solution nanoparticles were formed from association between the (S)-camptothecin–dextran polymers and the β-cyclodextrin polymers. Keywords: (S)-camptothecin; cyclodextrins; fluorescence; nanoparticles; ITC; Introduction Cancer remains to be the major cause of mortality in

Conjugates of methylated cyclodextrin derivatives and hydroxyethyl starch (HES): Synthesis, cytotoxicity and inclusion of anaesthetic actives

• Lisa Markenstein,
• Antje Appelt-Menzel,
• Marco Metzger and
• Gerhard Wenz

Beilstein J. Org. Chem. 2014, 10, 3087–3096, doi:10.3762/bjoc.10.325

• solubilized in water to allow further use in oral or parenteral dosage forms as an analgesic drug. Also the uptake of midazolam could be improved by complexation in CD derivatives [37][38]. Results and Discussion Cyclodextrin polymers were synthesized by copper-catalyzed [2 + 3] cycloaddition of methylated

Synthetic strategies for the fluorescent labeling of epichlorohydrin-branched cyclodextrin polymers

• Milo Malanga,
• Mihály Bálint,
• István Puskás,
• Kata Tuza,
• Tamás Sohajda,
• László Jicsinszky,
• Lajos Szente and
• Éva Fenyvesi

Beilstein J. Org. Chem. 2014, 10, 3007–3018, doi:10.3762/bjoc.10.319

• their spectroscopic properties thus generating chemosensors, biological tools for visualization and sophisticated photoresponsive devices. Cyclodextrin polymers, due to the cooperative interactions, exhibit additional properties compared to their monomeric counterpart. These macromolecules can be

• prepared either in well water-soluble form or as gels of high swelling. Two versatile synthetic strategies for introducing a fluorescent tag (rhodamine, fluorescein, nitrobenzofuran or coumarin) into the water-soluble epichlorohydrin branched cyclodextrin polymers were worked out and compared. The

• , the process of purification and the characterization for the epichlorohydrin branched water soluble polymers obtained from native cyclodextrins are well established processes [9][10]. The characteristics of the cyclodextrin polymers can be modulated by appending neutral or ionic functional groups

Synthesis and characterization of a hyper-branched water-soluble β-cyclodextrin polymer

• Francesco Trotta,
• Fabrizio Caldera,
• Roberta Cavalli,
• Andrea Mele,
• Carlo Punta,
• Lucio Melone,
• Franca Castiglione,
• Barbara Rossi,
• Monica Ferro,
• Vincenza Crupi,
• Domenico Majolino,
• Valentina Venuti and
• Dominique Scalarone

Beilstein J. Org. Chem. 2014, 10, 2586–2593, doi:10.3762/bjoc.10.271

• ; polyelectrolytes; soluble β-cyclodextrin polymers; Introduction Cyclodextrins (CDs) are biomolecules consisting of glucopyranoside units linked 1,4 to form cyclic oligossacharides. CDs composed of 6, 7 or 8 sugar units, which are known as α-, β- and γ-cyclodextrins respectively, are characterized by a toroidal

Bis(benzylamine) monomers: One-pot preparation and application in dendrimer scaffolds for removing pyrene from aqueous environments

• Olivia N. Monaco,
• Sarah C. Tomas,
• Meghan K. Kirrane and
• Amy M. Balija

Beilstein J. Org. Chem. 2013, 9, 2320–2327, doi:10.3762/bjoc.9.266

• obtained with cyclodextrin polymers (109 M−1) [33] and alkylated fifth-generation diaminobutane poly(propylene imine) dendrimers (108 M−1) [28][29][30]. The large magnitude is proposed to be due to the thermodynamically favorable process of pyrene moving from a hydrophilic to a hydrophobic environment. A

Cyclodextrin-based nanosponges as drug carriers

• Francesco Trotta,
• Marco Zanetti and
• Roberta Cavalli

Beilstein J. Org. Chem. 2012, 8, 2091–2099, doi:10.3762/bjoc.8.235

• nanosponges, which are proposed as a new nanosized delivery system, are innovative cross-linked cyclodextrin polymers nanostructured within a three-dimensional network. This type of cyclodextrin polymer can form porous insoluble nanoparticles with a crystalline or amorphous structure and spherical shape or

• by reacting native cyclodextrins with a cross-linking agent that, after reaction, exerts its own properties and influences the behaviour of the cyclodextrin unit. Although insoluble cross-linked cyclodextrin polymers were first reported a long time ago, by reacting the parent cyclodextrin with

• erythrocytes for 90 minutes, no haemolytic activity was observed up to a concentration of 15 mg/mL, showing that the nanosponges possess good blood compatibility. Acute systemic toxicity was evaluated after injection in mice. Unlike other cross-linked cyclodextrin polymers [19], nanosponges were found to be